CaseJunkies.com - Los bericht bekijken

tribaloverkill · 20-05-2006, 22:07

Bracket mock-ups. YeeeAAA.

Dec-18-2005

Here's the mock-up. You understand how this is going to work? It's not exact but it should give you the idea of how it's going to be. It an auto-tensioning bracket. Remeber the pump clamps I made that clamped to the back the the pumps to keep them attached the the tower? Well,.. I was going to do that with the bolt in the back but that was to sloppy for this. To much. I needed something that would tension and hold the reservoir just by mounting it. This is what I came up with.

When its not bolted down,... it's slides over very easily.

When it's bolted down it pulls the out band towards the case pull the reservoir into that cetner thingy. The center thing will have longer arms thingies and will be padded just like the inside of the band.

Reservoir mounted. Barbs facing out and away from teh case for mounting inside the case.

Barbs facing towards the case for mounting it outside the case.

The shields will mount to this these brackets. What is not shown here are the tabs that I make by folding the aluminum. There will be about 8 of them. The shields will be mounted to those. Any questions class? Class dismissed. Gawd I love the look of the thumbs!!! It's crazy cool looking!!! You know,... it would be great if you guyz used thumbs too

It would speed up the site and makes it faster for anyone. You don't have to but it would be nice. The site owners would love it.

20-05-2006, 22:07	#22 (permalink)
tribaloverkill Geregistreerd: 18 mei 2006 Berichten: 409	Bracket mock-ups. YeeeAAA. Dec-18-2005 Here's the mock-up. You understand how this is going to work? It's not exact but it should give you the idea of how it's going to be. It an auto-tensioning bracket. Remeber the pump clamps I made that clamped to the back the the pumps to keep them attached the the tower? Well,.. I was going to do that with the bolt in the back but that was to sloppy for this. To much. I needed something that would tension and hold the reservoir just by mounting it. This is what I came up with. When its not bolted down,... it's slides over very easily. When it's bolted down it pulls the out band towards the case pull the reservoir into that cetner thingy. The center thing will have longer arms thingies and will be padded just like the inside of the band. Reservoir mounted. Barbs facing out and away from teh case for mounting inside the case. Barbs facing towards the case for mounting it outside the case. The shields will mount to this these brackets. What is not shown here are the tabs that I make by folding the aluminum. There will be about 8 of them. The shields will be mounted to those. Any questions class? Class dismissed. Gawd I love the look of the thumbs!!! It's crazy cool looking!!! You know,... it would be great if you guyz used thumbs too It would speed up the site and makes it faster for anyone. You don't have to but it would be nice. The site owners would love it. __________________ iMod.